Skip to product information
FumeCaddie
  • FumeCaddie
  • FumeCaddie
  • FumeCaddie
Free shipping
FumeCaddie

FumeCaddie

The FumeCaddie is a mobile exhaust extractor that safely removes harmful exhaust gases and diesel emissions. This compact, mobile extraction unit is suitable for use in garages, barracks, and workshops.

The FumeCaddie efficiently removes exhaust fumes from any type of vehicle (up to 3.5 L). Thanks to its powerful source extraction, you can be sure your work environment is clean, safe, and healthy.
Connect the included nozzle to the vehicle's exhaust pipe and route the FumeCaddie's exhaust hose outside. The extractor will then safely remove the exhaust fumes.

✔ Healthier workshop for mechanics
✔ Easy to move
✔ Professional Plymovent quality
Item number: 6156
$2,265.00
Delivery times vary by state
In stock

Styled With
Product specifications

FumeCaddie, specifications by variant

Based on the US Product Data Sheet (version C, 120V/60Hz model).

SpecificationLight Duty (REN)Light Duty, Internal GrabberLight Duty, Dual Internal GrabberHeavy Duty
Article number6156644361576158
Nozzle included1x REN nozzle1x Internal Grabber2x Internal Grabber + 1x Inter Grabber coupler set1x REN nozzle
Best suited forRound, wide, or dual exhaust pipes (slides over the pipe)Exhaust pipes that sit flush with the bumper, where the REN nozzle does not fitVehicles with two separate exhaust outlets at onceHeavier engines, higher exhaust temperatures
Hose diameter4 in. (100 mm)4 in. (100 mm)4 in. (100 mm)6 in. (150 mm)
Hose length33 ft (10 m), cut to size on site33 ft (10 m), cut to size on site33 ft (10 m), cut to size on site33 ft (10 m), cut to size on site
Hose material / heat resistanceTPE, crush resistant, up to 350°F (177°C)TPE, crush resistant, up to 350°F (177°C)TPE, crush resistant, up to 350°F (177°C)TPE, crush resistant, up to 570°F (299°C)
FanFUA 1800, single phaseFUA 1800, single phaseFUA 1800, single phaseFUA 1800, single phase
Fan capacity600 cfm at 4 in. WG, 800 cfm unloaded600 cfm at 4 in. WG, 800 cfm unloaded600 cfm at 4 in. WG, 800 cfm unloaded600 cfm at 4 in. WG, 800 cfm unloaded
Electrical connection1~, 115V, 60Hz (208 to 230V optional)1~, 115V, 60Hz (208 to 230V optional)1~, 115V, 60Hz (208 to 230V optional)1~, 115V, 60Hz (208 to 230V optional)
Power cord9 ft, 120V plug9 ft, 120V plug9 ft, 120V plug9 ft, 120V plug
Engine applicationCombustion engines under 10 litersCombustion engines under 10 litersCombustion engines under 10 litersCombustion engines under 10 liters
Not suitable forTrucks with EGRTrucks with EGRTrucks with EGRTrucks with EGR
Weight (incl. hose)Approx. 73 lbs (33 kg)Approx. 73 lbs (33 kg)Approx. 73 lbs (33 kg)Approx. 73 lbs (33 kg)
Cart dimensions27 x 16 x 42 in. (690 x 407 x 1067 mm)27 x 16 x 42 in. (690 x 407 x 1067 mm)27 x 16 x 42 in. (690 x 407 x 1067 mm)27 x 16 x 42 in. (690 x 407 x 1067 mm)
Cart material / colorPowder coated galvanized steel, basalt grey RAL 7011Powder coated galvanized steel, basalt grey RAL 7011Powder coated galvanized steel, basalt grey RAL 7011Powder coated galvanized steel, basalt grey RAL 7011
CertificationAMCA certified fan, CSA rated, CE / UKCAAMCA certified fan, CSA rated, CE / UKCAAMCA certified fan, CSA rated, CE / UKCAAMCA certified fan, CSA rated, CE / UKCA
Packaging (gross)90 lbs (41 kg), 48 x 32 x 24 in.90 lbs (41 kg), 48 x 32 x 24 in.90 lbs (41 kg), 48 x 32 x 24 in.90 lbs (41 kg), 48 x 32 x 24 in.

Exhaust extraction system recommended
for:
  • Safe removal of exhaust gases and diesel emissions from vehicles, via an exhaust hose to the outside
  • Use in garages, fire stations, workshops and factory halls
  • Quick and easy connection to all types of petrol or diesel engine vehicles with a cylinder capacity of up to 3.5 L: cars, motorhomes, motorcycles, vans and pick-up trucks
  • Exhaust gas extraction during vehicle maintenance
  • Prevention of inhalation of toxic, irritating and sometimes carcinogenic substances in exhaust gases. For example: particulate matter,
    carbon monoxide, carbon dioxide, nitrogen oxides and volatile organic compounds. Avoid short-term and long-term health damage!
Features & highlights
  • The FumeCaddie captures exhaust fumes directly at the vehicle and transports them outside via the discharge hose
  • The FumeCaddie is an ergonomic, easily mobile unit equipped with a fan, a hose for connection to the car, a hose to vent exhaust gases outside, and a 5-meter power cable
  • The extractor is supplied with a rubber REN nozzle and a 10-meter EH hose.
  • With integrated motor protection switch with thermal protection
  • Optimal maneuverability and mobility
  • Installed and ready for use within five minutes
Brochures & specifications

FumeCaddie Product Data Sheet EN
FumeCaddie Brochure EN
Recommended use


Suitable for:

✓ Safe removal of vehicle exhaust gases and diesel emissions

✓ Use in garages, workshops, and factory halls

✓ Connection to all types of vehicles with petrol or diesel engines up to 3.5 L capacity

✓ Exhaust extraction during vehicle maintenance

✓ Preventing the inhalation of toxic, irritating, and sometimes carcinogenic substances in exhaust gases.


Unsuitable for:

✗ Trucks with EGR (Exhaust Gas Recirculation)

Complete set for safe
exhaust extraction

Your FumeCaddie comes with an exhaust hose and nozzle, so you can get started right away:

  • EH hose : High-quality, hardened 10-meter suction hose, extremely crush-resistant and suitable for temperatures up to 200°C. Resistant to all chemicals in exhaust fumes, flexible, and easy to use. This hose can be cut to the desired length according to your needs, for example, 2 to 3 meters for use on the suction side and the remaining meters for use on the discharge side.
  • REN nozzle : Rubber bell-shaped nozzle for all vehicle types (up to 3.5 L), especially for wide or dual exhaust pipes. It draws in ambient cooling air to lower the exhaust temperature and prevent overheating. It has an additional (closable) opening for a CO probe when measuring emissions. The REN nozzle simply slides over the exhaust pipe. (Not suitable for flush-mounted exhaust pipes; use the Internal Grabber instead.)

Supplied with an energy-efficient fan and handy trolley

The FumeCaddie features a powerful, single-phase FUA-2100 fan (60 Hz), perfect for extracting exhaust gases, volatile organic compounds, and dust. The fan expels the contaminated air through the exhaust hose. Despite its high capacity, the fan is energy-efficient. The fan, exhaust hose, 5 m power cable, and motor starter with thermal protection are mounted on an ergonomic, maneuverable trolley.

 Contact

Frequently Asked Questions about the FumeCaddie

What applications is the FumeCaddie suitable for?

The FumeCaddie is designed for removing exhaust gases and diesel emissions in garages and workshops. The FumeCaddie can be connected to any type of vehicle (with an engine capacity up to 3.5 L) via a nozzle. It is small, easy to move, and protects the engine from overheating during prolonged use. The FumeCaddie is not suitable for use with trucks equipped with EGR (Exhaust Recirculation).
How does the mobile FumeCaddie work?

The FumeCaddie is an ergonomic, lightweight unit that includes a fan, exhaust hose, power cord, and engine starter. It also includes a rubber REN nozzle that easily slides over your vehicle's exhaust (not suitable for flush-mounted exhaust pipes; use the Internal Grabber). The FumeCaddie extracts harmful exhaust fumes directly from the exhaust and expels them outside through the exhaust hose. This ensures you work in healthy conditions and avoids any health risks from hazardous emissions.
What does the mobile FumeCaddie offer you as a user?

Clean air in your work environment and healthy working conditions. This means you won't run any health risks from inhaling toxic, irritating, and sometimes carcinogenic substances in exhaust fumes. Think of particulate matter, carbon monoxide, carbon dioxide, nitrogen oxides, and volatile organic compounds. You'll also be much less likely to experience headaches, fatigue, or difficulty concentrating during and after your workday.
Is the FumeCaddie ready to use upon delivery?

Almost! Unpack it, cut the hose to the desired length (2 pieces). Connect these hoses and the nozzle, and plug it in. If you cut the hose to size, we recommend a length of 2-3 meters on the intake side. The nozzle is attached to this. The rest of the hose goes on the exhaust side and is led outside.
Do I need any accessories for my FumeCaddie?

Your FumeCaddie is a complete extractor, including an exhaust hose and a universal REN nozzle that fits almost all vehicles.
What are the advantages of a mobile exhaust extractor over a stationary, fixed unit?

Mobile extractors like the FumeCaddie are compact, versatile, and ideal for workplaces where there's limited space for large or permanent systems. They offer maximum flexibility and optimal extraction of polluted air.
Is the FumeCaddie easy to move?

Yes, thanks to its compact design and lightweight materials, the FumeCaddie is maneuverable and easy to move to different vehicles in your space.
I need advice, where can I get it?

Our experts are happy to help you find a solution for your situation! Click here to contact us.

Related products